Taizhou Jiangzhou Numerical Control Machine Tool Manufacture Co., Ltd.
Main products:CNC Machine
Products
Contact Us
  • Contact Person : Ms. gao anna
  • Company Name : Taizhou Jiangzhou Numerical Control Machine Tool Manufacture Co., Ltd.
  • Tel : 86-523-86562799
  • Fax : 86-523-86551641
  • Address : Jiangsu,Taizhou,No.16, Xingtai Road, Jiulong Industrial Zone
  • Country/Region : China
  • Zip : 225300

CNC Wire Cutting EDM DK7740B

CNC Wire Cutting EDM DK7740B
Product Detailed
CNC Wire Cutting EDM DK7740B accurate easy operate linear guide rail efficient low noise TM ISO9001:2008
Parameters/typeDK7740B
worktable travel(mm)400×630
max. workpiece cutting thickness(mm)400
worktable displacement(mm)4
machining precision(cutting octagon)(mm)0.015
max. cutting speed(mm²/min)100
max. cutting taper(optional)6°-30°
worktable's max. load(kg)450
wire electrode diameter(mm)Φ0.12-Φ0.18
wire storage cylinder dimensions(mm)150×200
max. wire length(mm)320
equivalent pulse(mm)0.001
stepped motor90BF006
wire storage cylinder motor

AC:YS7124   370w  1400rpm 

DC:110SYT   185w  1500rpm

operation liquid pump                        AB25     90W      25L/min
outline dimensions(mm)1800×1600×1500
machine weight(kg)1600
total power2kW  AC 380V/220V 50Hz

    

different types,reasonable construction,high rigidity,and good accuracy.

linear guide rail adopted for top grade machines.

For high vertical column machines electrical up and down motion is used for adjustment of space between two guide wheels.

Our swinging type large tapper series of machine are equipped with constant tensioning devices for wire electrode.

Half enclosed environment protecting machines are  also manufactured in our company.

The range of molybdenum wire is Φ0.12mm to Φ0.18mm (Special type Φ0.18mm is ordered by cutomer).

The max machining speed is 100 mm²/min.

The finest roughness is Ra2.5μm. 

 

Machine tool structural summary:

The machine tool is composed of the machine tool bed, coordinate worktable, wire drive device, wire support, operation liquid system, electric parts and accessories.

The wire electrode used for machining is wound on the wire storage cylinder evenly and its high-speed to-and-fro movement is driven through the guide wheel on the wire support.

The work piece is installed on the clamp of the worktable and is fixed with the press head screws.

The worktable drives the work piece to move in the programmed track.

 

1 Bed:

The machine tool is the cast iron box.

Its upper part takes the tray shape.

On the bed, there are worktable, wire drive device, wire support and floodlight.

2 Coordinate worktable:     

The coordinate worktable is composed of the worktable, lower trailing bar, precision roller (slide) screw rod pair and the gearbox.

Use roller track structure for the horizontal and lengthwise movements of the trailing bar.

The worktable movement is realized through the stepped motor, the deceleration gear set and the screw rod pair.

The screw rod nut is pre-tightened axially so as to make the gap between the screw rod and the nut close to zero.

There are 2 T-shaped grooves on the worktable for fixing the clamps.  

3 Wire drive device:    

The wire drive device is composed of the wire storage cylinder, trailing bar, gear set, slide screw rod pair, bearing house and base.

Realizes the high-speed to-and-fro movement of the wire electrode.

The wire storage cylinder is reliably insulated.

The motor drives the wire storage cylinder rotation through the flexible shaft coupling.

The shift gear set drives the screw rod, which drives the trailing bar to discharge the wire so as to realize the circulative use of the wire electrode. 

Use a group of travel switches to control the frequent reversion of the trailing bar of the wire storage cylinder.

Adjust the distance between the shift forks according to the wire discharging width of the wire storage cylinder.

Leave 3mm wide wire electrode as the non-working section at each end.

If the wire electrode has diameter more than 0.18 mm, order separately change gear set.

During the operation of the machine tool, be sure not to move the waterproof cover on the side of the wire storage cylinder.

4 Wire support:   

The wire support is used to support the wire electrode.

It is composed of the pillar, upper arm, lower arm, conductive block and the guide wheel.

The upper arm can move upward and downward so as to adjust the span between the upper and lower guide wheels and to suit the machining of the work pieces with different thickness.

The guide wheel and the conductive block are encased into the wire support and insulated from the upper and lower arms.

The wire discharge wheel (wire blocking rod) at the back ends of the upper and lower arms can avoid wire overlapping.

The water valve is installed at the lower part of the column.

The two knobs on the panel are used to adjust the operation liquid flow rate from the upper and lower nozzles.

The taper head (coordinate cross trailing rod) is installed at the top of the upper arm so as to realize the movements of the guide wheel in U and V axis, to form some angle between the wire electrode and the worktable and to realize the tapered cutting.

maximum cutting taper 30° use the wabble mechanism to realize the simultaneous deflexion of the upper and lower guide wheels so as to ensure the big taper machining precision.

5  Operation liquid system:

It is used to provide the operation medium, that is, the operation liquid with certain insulation function.

At the same time, it can cool down the work piece and the wire electrode.

The water pump pumps the operation liquid for wire cutting to the machining area.

This is in favor of the sparkle discharge and the scrap discharge.

The operation liquid flows back to the operation liquid box through the water pipe and it is recycled after filtration.

The residue settles in the waste box.

The operation liquid box shall be cleared up regularly and the operation liquid shall be replaced timely.

Use the tapped water or diluted water to prepare the operation liquid according to the mixture ratio.

DK7740B CNC Wire Cutting EDM

CNC Wire Cutting EDM DK7740B



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.